Click on the image to check the artwork
1. Brief Introduction of Pipe End Prepration Machine
We design and produce the fully Pipe End Prepration Machine (including internal expanding type and external clamping type) range from 6inch-60inch.
The extreme high cutting accuracy of Pipe End Prepration Machine is (±0.05mm,roughness Ra3.2)
Tremendous fast cutting efficiency of Pipe End Prepration Machine is (1-5mins)
We are the approved supplierof CNOOC (China National Offshore Oil Corporation),our Pipe End Prepration Machine had been successfully applied on the offshore project of pipe laying barge "Offshore Oil 201".
Applicable material: Carbon steel, alloy steel, stainless steel etc
Pipe End Prepration Machine Beveling shape:
2.Specification of Pipe End Prepration Machine
Type |
DPFM0612 |
DPFM1224 |
DPFM2436 |
DPFM3648 |
DPFM4860 |
|
Produce Size (H*W*H mm) |
2000×1100X1050 |
2550X1400X1300 |
2600X1800X1750 |
3200×2100×2200 |
3300×2400×2400 |
|
Weight |
750KG |
1500KG |
2700KG |
4000KG |
4500KG |
|
Applicable Range |
6''-12'' |
12''-24'' |
24''-36'' |
36 ''- 48'' |
48''-60'' |
|
|
MAX.applicable wall thickness |
25mm |
25mm |
30mm |
40mm |
40mm |
|
Clamping type |
Internal centering hydraulic expanding mechanism: accurate centering, powerful clamping, safe and reliable |
|||||
Bevel shape |
V shape,J shape,X Shape, combined inner and outer bevel shape |
|||||
Beveling accuracy |
Dimension tolerance ±0.05mm,angle tolerance ±0.2 ° , Ra3.2 |
|||||
|
Beveling efficiency(including auxiliary time ) |
||||||